Introduction to Operational Amplifiers

By
On:

Operational Amplifiers (usually called ‘op amps’) were originally made from discrete components, being designed to solve mathematical equations electronically, by performing operations such as addition and division in analogue computers. Now produced in integrated-circuit (IC) form, op amps have many uses, with one of the most important being as a high-gain d.c. and a.c. voltage amplifier.

The main properties of an op amp include:

  1. a very high open-loop voltage gain Ao of around 105 for d.c. and low frequency a.c., which decreases with frequency increase
  2. a very high input impedance, typically 106 Ω to 1012 Ω, such that current drawn from the device, or the circuit supplying it, is very small and the input voltage is passed on to the op amp with little loss
  3. a very low output impedance, around 100 Ω, such that its output voltage is transferred efficiently to any load greater than a few kilohms. The circuit diagram symbol for an op amp is shown in figure It has one output, Vo , and two inputs; the inverting input, V1 is marked −, and the non-inverting input, V2, is marked +

The operation of an op amp is most convenient from a dual balanced d.c. power supply ±Vs (i.e. +Vs, 0, − Vs); the centre point of the supply, i.e. 0V, is

Introduction to Operational Amplifiers

common to the input and output circuits and is taken as their voltage reference level. The power supply connections are not usually shown in a circuit diagram.

An op amp is basically a differential voltage amplifier, i.e. it amplifies the difference between input voltages V1 and V2.

Three situations are possible:

(i) if V2 > V1, Vo is positive
(ii) if V2 < V1, Vo is negative
(iii) if V2 = V1, Vo is zero

\begin{aligned} In general, V_0 & =A_0\left(V_2-V_1\right) or \\ A_0 & =\frac{V_0}{V_2-V_1} \end{aligned} 

where Ao is the open-loop voltage gain.

Read More Topics
Maximum power transfer theorem
Conduction in semiconductor materials
Introduction to electromagnetic induction
Magnetic field due to an electric current

Santhakumar Raja

Hello The goal of this blog is to keep students informed about developments in the field of education. encourages pupils to improve as writers and readers.

For Feedback - techactive6@gmail.com

Leave a Comment